Automated systems - Fom Industrie

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Find out how the machine works

Configure your workshop with CARL

CARL is the original Fom Industrie app to design customised workshops based both on your production needs and your available space!
We can configure your model using CARL and project it using enhanced reality mode!

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!

L'articolo LMX2 650 proviene da Fom Industrie.

LT 600

fom_user — Fri, 16 Apr 2021 15:48:46 +0000

Cutting unit with 90° upfeed blade lead-out for 90° cuts

The loading magazine carries out accumulation and horizontal transfer of the profiles. Version with loading roller table available. Between 9 and 13 bars can be loaded, according to the version

Controlled bar feeder, inside the cabin

The unloading magazine allows accumulation and compacting of the cut pieces. Version with plane out or unloading tunnel available

Cutting unit with 90° upfeed blade lead-out for 90° cuts

The loading magazine carries out accumulation and horizontal transfer of the profiles. Version with loading roller table available. Between 9 and 13 bars can be loaded, according to the version

Controlled bar feeder, inside the cabin

The unloading magazine allows accumulation and compacting of the cut pieces. Version with plane out or unloading tunnel available

Cutting line with up feed blade Ø 600 mm for 90° cut

The system LT 600 produces parts cut to size using a bar loading system and cutting machine with upward blade exit. 11 versions are available with hich can be configured in terms of depth and length of material loading/unloading magazines, right/left feed direction and cutting unit type.

Integrated software

FSTLine is the management software for Fom Industrie cutting lines and cutting and machining lines. FSTLine allows users to complete all phases of machine programming using a single application, from programming of machining operations through to work list management.

Documentation

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Discover how the machine works

Configure your workshop with CARL

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!

L'articolo LT 600 proviene da Fom Industrie.

LT 500

fom_user — Fri, 16 Apr 2021 15:42:05 +0000

Profile feed system consisting of horizontal rollers and vertical rollers in non-scratch material. For machining of profiles with highly complex and irregular geometries, the bar feeder can be supplied with a profile overturning device

The loading magazine carries out accumulation and horizontal transfer of the profiles. It can house from up to 13 bars

Cutting unit with front blade exit and electronic blade tilt positioning

The unloading magazine allows the finished pieces to be rapidly extracted, stored and compacted on motorised belts and then transported towards the operator. Version with plane out available

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability

The gripper with automatic, controlled positioning (3 axes) allows pick-up to be adapted quickly and accurately to any profile geometry

Profile feed system consisting of horizontal rollers and vertical rollers in non-scratch material. For machining of profiles with highly complex and irregular geometries, the bar feeder can be supplied with a profile overturning device
The loading magazine carries out accumulation and horizontal transfer of the profiles. It can house from up to 13 bars

Cutting unit with front blade exit and electronic blade tilt positioning

The unloading magazine allows the finished pieces to be rapidly extracted, stored and compacted on motorised belts and then transported towards the operator. Version with plane out available.

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability
The gripper with automatic, controlled positioning (3 axes) allows pick-up to be adapted quickly and accurately to any profile geometry

Cutting line with frontal blade Ø 500 mm

The system LT 500, which is fully commanded by a numerical control, produces cut to measure elements by means of a bar feeder and a sawing machine with front blade exit. 4 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines, right/left feed direction and cutting unit type.

Integrated software

Documentation

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Discover how the machine works

Configure your workshop with CARL

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!

L'articolo LT 500 proviene da Fom Industrie.

LT 65

fom_user — Fri, 16 Apr 2021 15:18:30 +0000

Profile feeder system consisting of horizontal rollers and vertical rollers in anti-scratch material. When machining profiles with very complex and irregular geometries the bar feeder can be equipped with an innovative solution for the overturning and automatic support of the profile

The loading magazine carries out accumulation and horizontal transfer of the profiles. According to the version it can house from 6 to 18 bars

The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry

Cutting unit with front blade exit and electronic blade tilt positioning

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability

Soundproof casing

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator

The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry
The loading magazine carries out accumulation and horizontal transfer of the profiles. According to the version it can house from 6 to 18 bars
Profile feeder system consisting of horizontal rollers and vertical rollers in anti-scratch material. When machining profiles with very complex and irregular geometries the bar feeder can be equipped with an innovative solution for the overturning and automatic support of the profile

Soundproof casing
Cutting unit with front blade exit and electronic blade tilt positioning

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator

Cutting line with frontal blade Ø 650 mm

The system LT 65, which is fully commanded by a numerical control, produces cut to measure elements by means of a bar feeder and a sawing machine with front blade exit. 20 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines and right or left feed direction.

Integrated software

Documentation

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Discover how the machine works

Configure your workshop with CARL

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!

L'articolo LT 65 proviene da Fom Industrie.

LMT 65

fom_user — Thu, 15 Apr 2021 15:49:35 +0000

The loading magazine carries out accumulation and horizontal transfer of the profiles. According to the version it can house from 6 to 18 bars

The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability

Soundproof cabin with extended visibility, with luminous Fom logo indicating the machine status

The multispindle machining unit has been designed to carry out machining operations on all four sides of the profile. Can be equipped to carry out oblique machining operations and rigid tapping. Designed to receive up to 16 HSK- C40 electrospindles

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator

Cutting unit with front blade exit and electronic blade tilt positioning

Profile feeder system consisting of horizontal rollers and vertical rollers in anti-scratch material. When machining profiles with very complex and irregular geometries the bar feeder can be equipped with an innovative solution for the overturning and automatic support of the profile
The loading magazine carries out accumulation and horizontal transfer of the profiles. According to the version it can house from 6 to 18 bars

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam, guarantees long term rigidity and stability
The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry

Soundproof cabin with extended visibility, with luminous Fom logo indicating the machine status
The multispindle machining unit has been designed to carry out machining operations on all four sides of the profile. Can be equipped to carry out oblique machining operations and rigid tapping. Designed to receive up to 16 HSK- C40 electrospindles
Cutting unit with front blade exit and electronic blade tilt positioning

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator

Machining and cutting line with frontal Ø 650 mm blade and bar passage 250x200 mm

The machining unit LMT 65 tooled up with max 16 electrospindles and the cutting unit with 20° to 160° controlled blade tilt produce a continuous flow of machined and cut to measure elements. 20 different variants are available, which can be configured in terms of depth and length of material loading/unloading magazines and right or left feed direction.

Integrated Software

Documentation

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Find out how the machine works

Configure your workshop with CARL

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!

L'articolo LMT 65 proviene da Fom Industrie.

LMX 650

fom_user — Thu, 15 Apr 2021 15:41:35 +0000

XLAB Automatic printer with application of labels to the moving bars. Ability to label the top or rear surface

The loading magazine carries out accumulation and horizontal transfer of the profiles. According to the version it can house from 6 to 9 bars (with Y Max 300 mm or 220 mm).

The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry.

55″ LCD screen to view the programs and the bars to be loaded

Soundproof cabin with extended visibility, with luminous Fom logo indicating the machine status

X MODULE is the downfeed saw unit with controlled 4 axis drive (x, y, z and rotation A) and blade Ø650mm. Two groups of powered vices are provided for proper alignment and pneumatic locking of profiles at infeed and outfeed. The vice tables are equipped with blowing devices for chip cleaning

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam that guarantees long term rigidity and stability, can be equipped with an additional system specifically for packs of profiles and solid profiles

Profile feeder system consisting of horizontal rollers and vertical rollers in anti-scratch material. When machining profiles with very complex and irregular geometries the bar feeder can be equipped with an innovative controlled axis solution for the overturning and automatic support of the profile. Packs of profiles or solid profiles are fed by independently lowered horizontal rollers.

Adjustable control console attached to the guard cabin and used to execute commands and run programs

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator. A blowing phase is always provided to guarantee that the finished piece is clean

XMU, X Milling Unit is the additional machining unit with 16kW electrospindle for milling, trimming and cutting with front blade feed

Soundproof cabin with extended visibility, with luminous Fom logo indicating the machine status
The multispindle machining unit has been designed to carry out machining operations on all four sides of the profile. Tilting electrospindles are available with pneumatic or controlled drive rotation for oblique machining operations and electrospindles for rigid tapping. Designed to receive up to 18 HSK- C40 electrospindles
X MODULE is the downfeed saw unit with controlled 4 axis drive (x, y, z and rotation A) and blade Ø650mm. Two groups of powered vices are provided for proper alignment and pneumatic locking of profiles at infeed and outfeed. The vice tables are equipped with blowing devices for chip cleaning
XMU, X Milling Unit is the additional machining unit with 16kW electrospindle for milling, trimming and cutting with front blade feed

Profile feeder system consisting of horizontal rollers and vertical rollers in anti-scratch material. When machining profiles with very complex and irregular geometries the bar feeder can be equipped with an innovative controlled axis solution for the overturning and automatic support of the profile. Packs of profiles or solid profiles are fed by independently lowered horizontal rollers
The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator. A blowing phase is always provided to guarantee that the finished piece is clean
XLAB Automatic printer with application of labels to the moving bars. Ability to label the top or rear surface

The bar feeder and profile pick-up system, consisting of an electrowelded steel beam that guarantees long term rigidity and stability, can be equipped with an additional system specifically for packs of profiles and solid profiles
The gripper with automatic, controlled positioning (4 axes) allows pick-up to be adapted quickly and accurately to any profile geometry.

The unloading magazine allows rapid extraction of the finished pieces, subsequent accumulation and compacting on driven belts and transfer to the operator. A blowing phase is always provided to guarantee that the finished piece is clean.

Machining and cutting line with down-feed blade Ø 650 mm and bar passage 300x300 mm

The machining unit LMX 650 tooled up with max 18 electrospindles and the cutting unit with infinite 360° blade rotation produce a continuous flow of processed and cut to measure elements. The additional machining module XMU carries out end milling (with blade, mill or mill units), boring and head tapping, as well as 45° and 135° inclined cuts, guaranteeing maximum flexibility for numerous applications. The high visibility cabin and the presence of the luminous FOM logo indicating the machine status are characteristic of the futuristic design of the system of LMX 650.
6 different variants are available, which can be configured in terms of length of material loading/unloading magazines and feed direction.

Integrated software

Documentation

The images are for illustrative purposes only. FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.

Find out how the machine works

Configure your workshop with CARL

It is also possible to position 1:1 scale models of FOM machines directly in your workshop, for an all-round experience!